What you get for your money : 1 lead which plugs into your cigar lighter, this lead plugs into the control unit. From the control unit you have a lead running to the front plate and a lead running to the rear plate. Also coming from the control unit is a lead with 2 led lights showing if the plates are currently shielded. And of course the 2 number plate shield surrounds. And 1 remote control.

To fit is very simple, and operation is very simple. Unlike alot of plate cover options these plate guards will hold a proper sized UK number plate.

To operate:- Very simple, you get a remote control (these functions are also available on the control panel) You can cover either the front the rear or even both together. It takes roughly 3 seconds for the shield to cover the plate. You are supplied with a led lead which plugs into the control panel, if you mount this lead close to your dash you will be able to see if either of you plates are covered as a led lights to show the shield is active.

Please click below to watch the plates in operation.

LEGAL DISCLAIMER : NOT TO BE USED ON UK ROADS.   Finally I have got around to fitting one to my car. Below is the remote control with the aerial up and down. Below is the Frame closed and open.       Below is the control unit along with the dash display.           Approx size of surround: 25mm deep, 530mm wide, 140mm

Below is an image of the plate surrounds on a JEEP. Please note the front plate has been custom fitted with a surround around the surround

Below on an A Class Merc

Below is a simulated image of the plate surrounds on a Mercedes.

NOW AVAILABLE FOR USA PLATES

LEGAL DISCLAIMER : NOT TO BE USED ON UK ROADS.